Linux version 2.4.5 (root@moray) (gcc version 2.95.4 20010604 (Debian prerelease)) #7 Mon Jun 25 23:55:03 BST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
 BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000006ff0000 (usable)
 BIOS-e820: 0000000006ff0000 - 0000000006fff800 (ACPI data)
 BIOS-e820: 0000000006fff800 - 0000000007000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009b800 for 4096 bytes.
On node 0 totalpages: 28656
zone(0): 4096 pages.
zone(1): 24560 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (011dd000)
Kernel command line: root=/dev/hda4 mem=114624K
Initializing CPU#0
Detected 595.517 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1163.26 BogoMIPS
Memory: 110632k/114624k available (937k kernel code, 3604k reserved, 354k data, 180k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0084803f 0081813f 00000006, vendor = 7
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 512K (128 bytes/line)
CPU: Processor revision 1.3.1.2, 600 MHz
CPU: Code Morphing Software revision 4.1.4-7-51
CPU: 20000805 23:30 official release 4.1.4#2
CPU: After vendor init, caps: 0084813f 0081813f 00000006 00000000
CPU serial number disabled.
CPU:     After generic, caps: 0080813f 0081813f 00000006 00000000
CPU:             Common caps: 0080813f 0081813f 00000006 00000000
CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfd98e, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 9 for device 00:08.0
PCI: The same IRQ used for device 00:07.2
  got res[10000000:10000fff] for resource 0 of Ricoh Co Ltd RL5c475
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
block: queued sectors max/low 73402kB/24467kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hda: HITACHI_DK23AA-12, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 23579136 sectors (12073 MB) w/512KiB Cache, CHS=1467/255/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p4
loop: loaded (max 8 devices)
PCI: Enabling device 00:09.0 (0006 -> 0007)
PCI: Assigned IRQ 9 for device 00:09.0
ymfpci: YMF754 at 0xfc108000 IRQ 9
ac97_codec: AC97 Audio codec, id: 0x414b:0x4d02 (Asahi Kasei AK4543)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:07.2
PCI: The same IRQ used for device 00:08.0
uhci.c: USB UHCI at I/O 0x1020, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c:  Linus Torvalds, Johannes Erdfelt, Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber
uhci.c: USB Universal Host Controller Interface driver
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 180k freed
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x54c/0x32) is not claimed by any active driver.
Adding Swap: 248968k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Sony      Model: MSC-U01N          Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 126848 512-byte hdwr sectors (65 MB)
sda: Write Protect is on
 /dev/scsi/host0/bus0/target0/lun0: p1
sonypi: Sony Programmable I/O Controller Driver v1.1.
sonypi: enabled at irq=11, port1=0x10c0, port2=0x10c4
sonypi: device allocated minor is 63
Linux PCMCIA Card Services 3.1.25
  kernel build: 2.4.5 #6 Mon Jun 25 20:55:57 BST 2001
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: <6>PCI: Assigned IRQ 9 for device 00:0c.0
PCI: The same IRQ used for device 00:0b.0

  Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0c, mem 0x10000000
    host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 1/4]
    ISA irqs (default) = 3,4,5,7,10,12,15 PCI status changes
Linux video capture interface: v1.00
meye: using 2 buffers with 600k (1200k total) for capture
PCI: Enabling device 00:0b.0 (0010 -> 0012)
PCI: Found IRQ 9 for device 00:0b.0
PCI: The same IRQ used for device 00:0c.0
meye: Motion Eye Camera Driver v1.0.
meye: mchip KL5A72002 rev. 1, base fc104800, irq 9
raw1394: /dev/raw1394 device initialized
ieee1394: registered ohci1394 driver, initializing now
ohci1394: looking for Ohci1394 cards
PCI: Enabling device 00:08.0 (0010 -> 0012)
PCI: Found IRQ 9 for device 00:08.0
PCI: The same IRQ used for device 00:07.2
ohci1394_0: remapped memory spaces reg 0xc7db2000
ohci1394_0: allocated interrupt 9
ohci1394_0: soft reset finished
ohci1394_0: max packet size = 2048 bytes
ohci1394_0: 4 iso receive contexts available
ohci1394_0: 8 iso transmit contexts available
ohci1394_0: Receive DMA ctx=0 initialized
ohci1394_0: Receive DMA ctx=1 initialized
ohci1394_0: AT dma ctx=0 initialized
ohci1394_0: AT dma ctx=1 initialized
ohci1394_0: Receive DMA ctx=2 initialized
ohci1394_0: resetting bus on request
ohci1394_0: SelfID process finished (phyid 0, root)
ohci1394_0: selfid packet 0x807f8052 rcvd
ieee1394: including selfid 0x52807f80
ohci1394_0: This node self-id is 0x807f8052
ohci1394_0: calling self-id complete
ohci1394_0: Got phy packet ctx=0 ... discarded
ieee1394: detected 1 ohci1394 adapter 
ieee1394: registered pcilynx driver, initializing now
video1394: initialized with 1 ohci cards